Yealink AP08 Dante DSP, 16×16 Dante Channels, 3 PoE+ Ports

The Yealink AP08 is a digital signal processor for meeting-room audio. It handles 16 × 16 Dante audio channels, eight of them with dynamic acoustic echo cancellation, intelligent noise cancellation and reverberation suppression, alongside 4 × 4 analog channels and two simultaneous USB 3.0 Type-B device interfaces.

Three RJ-45 Dante LAN ports each supply IEEE 802.3at PoE+ from a 90 W total budget, so up to three audio devices run straight from the processor. With Yealink Room Designer, the AP08 produces a room design and builds the audio links automatically once a set of Yealink SkySound devices is on the same network. In Yealink MVC Teams rooms, audio is controlled from the MVC control panel, with synchronized mute and automatic EQ. RS-232, a management RJ-45 for API control and eight GPIO inputs and outputs connect it to room control systems, and the balanced analog inputs provide 48 V phantom power.

Ideal for: Microsoft Teams Rooms built on Yealink MVC systems, boardrooms and training rooms in Oman that combine Dante ceiling audio with analog and USB sources.

• Dante: 16 inputs (8 with AEC) / 16 outputs, 48 kHz, 24-bit
• Analog: 2 × RCA in/out, 2 × 3-pin Phoenix balanced in/out, 48 V phantom power
• USB: 2 × USB 3.0 Type-B device interfaces
• LAN: 3 × RJ-45 Dante PoE+ (802.3at), 90 W total
• Control: RS-232, MGMT RJ-45 for API, GPIO in 1-8 / out 1-8
• Size and weight: 360 × 189 × 44 mm, 2.2 kg
• Power: 100–240 V, 50/60 Hz